The Desheeter (Waste Sheet Conveyor) automatically pulls waste sheets off the line, reducing the cycle time otherwise needed to remove them with forklifts or by hand. It automatically removes the waste sheet for customer orders that do not require one.
Desheeter
Desheeter
The Innoveyance Desheeter automatically removes waste, damaged, or test sheets from a corrugated line and conveys them away for recycling — keeping good product flowing and waste out of the way. It is the clean, automated answer to the scrap-sheet handling every box plant deals with.
Pull waste sheets off the line automatically
Damaged sheets, run-up waste, and test sheets have to leave the line without disrupting production. The desheeter diverts and conveys these waste sheets away to a baler or recycling point, so operators aren’t pulling scrap by hand and good product keeps moving.
Cleaner, faster, safer scrap handling
Automating waste-sheet removal reduces manual handling, keeps walkways clear, and feeds scrap directly into recycling — improving housekeeping and throughput at once. Integration with plant scrap and air systems is engineered to your layout.
US-built and engineered to fit
Configured to your line and waste-handling setup. Every system is engineered, built, and supported in the United States, so lead times, customization, and service stay close to your plant — not an ocean away.
SPECIFICATIONS
| Specification | Detail |
|---|---|
| Function | Removes waste/damaged/test sheets from the line |
| Destination | Baler / recycling / scrap system |
| Benefit | Less manual scrap handling, cleaner line, better flow |
| Vertical | Corrugated plants |
| Integration | Scrap and air handling systems |
| Build / support | Engineered, manufactured, and serviced in the USA |
WESTERN USBuying in the Western US?
Greene House Group represents this line for corrugated and box-making plants across the western United States.
Desheeters at Greene House Group (Western US)
Features
- Drive: 1 HP totally enclosed, industrial-rated motor on an in-line reducer (grease-filled, maintenance-free for two years), located within and under the device. A rotary limit switch with #40 chain and sprocket sets adjustable forward and rear head positions.
- Preassembly: Unit is wired and (when applicable) plumbed to a junction box at the factory; roller brake mounted and plumbed (when applicable) at the factory.
Specifications
- Conveyor Height: 12ʺ TOR minimum, with leg and device extensions available for other heights.
- Speed: 45, 60 FPM available.
- Cycle Time: 30 to 40 seconds.
- Rate: Up to 90 loads per hour.
- Capacity: 5,000 lbs. maximum.
- Voltage: 230/460 volt, 3 phase, 60 hertz with 115 volt single-phase control voltage.
- Waste-Sheet Sizes: 4 to 11 inches beyond the load is acceptable.
Video
FAQs
Q: What is a desheeter / waste sheet conveyor?
A: A desheeter automatically diverts and conveys waste, damaged, or test sheets away from a corrugated line to a baler or recycling point, so operators don't handle scrap by hand and good product keeps flowing.
Q: How does a desheeter improve a corrugated line?
A: It removes manual scrap handling, keeps walkways and the line clear, and feeds waste directly into recycling — improving housekeeping, safety, and throughput simultaneously.
Q: Is the desheeter made in the USA?
A: Yes. Innoveyance engineers, manufactures, and services the Desheeter in the United States, configured to your line and waste-handling setup.
You may also like…
-
Mesh-Top Belt Conveyor (MTC) The Innoveyance Mesh-Top Belt Conveyor (MTC)…
-
POWER ACCUMULATION ROLLER CONVEYOR (PARC) Innoveyance accumulation conveyors hold product…
-
INNoveyance Systems — Custom Engineered Solutions INNoveyance Systems are complete,…
-
Roll Handing Capabilities Innoveyance roll handling systems move, prepare, and…
