Menu Close

Power Pivoting Conveyor

Pivoting Conveyor

Power Pivoting Conveyor (PPC)

The Pivoting Conveyor is used for the transfer of product from one conveyor to a perpendicular conveyor while maintaining load orientation.

Category:

Description

The Pivoting Conveyor includes a fixed Pivot Point which can be located at either end or in the center along one side of the device. This device can also be used as a “Gateway” to provide fork truck access through a conveyor system. The unit is an integral part of a Powered Roller Conveyor.

Features

Transition Sections: Provided to match the adjoining Conveyors’ width. Sections can be Non-Power or Chain-Assisted by the adjoining Innoveyance Powered Conveyor. Pivot Post: Floor Mounted with Heavy Duty Flange Mount Bearings. Support Wheels: 6” diameter monothane tread wheels which ride on the floor surface. Surface must be smooth and level to ensure proper operation and to prolong wheel life. Rotational Drive System: One (1) 8” diameter rubber drive wheel (90 Durometer) which is mounted to a Pivoting Drive Base with a captivated Air Mount to compensate for any floor variations. Unit is powered by a 1 hp brakemotor which is totally enclosed, industrial rated, motor, mounted to an in-line reducer. Reducer is grease filled and maintenance free for a 2-year period. Safety Features: Device is equipped with a horn and flashing light that is activated during the rotation of the device. Internally mounted photo-eye sensors insure positive load placement before rotation. Controls: Available with Manual, Automatic, or OEM Controls. All rotational positioning is performed through proximity sensors mounted to the base of the device. Conveyor includes photo-eye activated controls for both ends. Power: Floor mounted mast with multiple conductor cable which connects to the pivoting base of the unit. Preassembly: Unit is wired at the factory and (if applicable) plumbed to a junction box. Device Height: 12” TOR minimum with extensions available for other heights. Rotational Speed: 45, or 60 fpm available. Variable Speed Drive is also available as an option. Capacity: 5,000 lbs. maximum Voltage: System Voltage is 230/460 volt, 3 phase, 60 hertz with 115 volt, single phase control voltage.

Specifications

info to come

Data Table

info to come

Literature

info to come

Video

info to come
Enquiry Cart
Enquiry Cart ×
Loading....